Spinning wheel with clickety clacker
This is a spinning wheel with a clickety clacker! It is numbered 1-12 and the top clacker is made from ninjaflex (or similar rubbery type 3D printing material), the feet on the bottom of the stand are also made from ninjaflex but are not really essential for the spinning wheel to operate.
You can use this spinning wheel for games (board games or make up your own!) or as a random 1-12 number generator.
Print level: Intermediate
Infill Level: %
Model originally printed on: Makerbot Replicator 2X
Recommended print settings:
All the parts were printed in ABS with 2 layers and 10% infill (except for the orange parts which were made from NinjaFlex). Only one each of the parts is required except for the rubber feet (which are optional). All the parts have been optimised to reduce the total supports needed and to enable all the parts to be able to be put together easily. This is an intermediate print because some of the parts press fit together and there is also some assembly required which means that the tolerances are important on your printer.