Small House Model with Detachable Roof
This design aimed to prove that you can have multicoloured models without dual extruders or filament dying techniques. The House and Roof were designed to be assembled afterwards and as an architectural model it makes the design interactive for designers and their clients!
This model is just a little showpiece and is fun to take apart and inspect, enjoy!
Print level: Intermediate
Infill Level: %
Model originally printed on: Robobeast
Recommended print settings:
House: 0.15mm layer height (quality in layer height is up to you) @35mm/s. 2 perimeters and 100% infill. Supports for door and window openings.
Roof: 0.2mm layer height @60mm/s. 2 perimeters and 0% infill with 4 or 5 top/bottom layers.