Plastic bottle sprinkler connector

Sign up today to download this design, it’s free, doesn’t require a credit card, takes under 30 seconds and you can use you email or Facebook account. If you already have an account please login.


This is a connector that joins a plastic soft drink bottle to your standard hose connection. It can be used so that you can make a custom sprinkler where you control the pattern of water and where it is sprayed, great if you only want to do a section of your lawn or you have an oddly shaped lawn/garden.
Print out the connector and add an o ring (optional, gives a better seal) and then screw it onto the bottle you wish to use. Pierce the bottle in the sprinkler pattern you want (using a sharp object or drill, be vary careful and take appropriate safety measures). Then simply attach the connector and bottle to the hose connection as usual.

Print level: Beginner





Post Processing:

Infill Level: %

Material Type:

Print Time:

Model originally printed on: Makerbot Replicator 2X

Recommended print settings:

Print in 3 layers with 10-15% infill, 3 layers gives a better water seal. You can also seal the connector using an acetone vapour bath (if printing in ABS) or another appropriate sealant.

Other designs you may like