Kiss me V2
Another lightly sexy figurine for another study on drapery.
Can be a beautiful paper weight if you carve the base to put some weight (like gluing a steel ball or pieces of lead).
Original scale size (mm):
Length= 91.82mm Width= 96.38mm Height= 120mm
Print level: Beginner
Infill Level: %
Model originally printed on: Solidoodle 4
Recommended print settings:
Truly optimized for FDM printers - No support needed. 0.4mm nozzle, ABS 1.75mm, 0.15mm layer, 2 perimeters, 10% infill.
Beware of the big base if your first layer is not properly calibrated, use a brim to prevent warping/unsticking. You can reduce the scale to x 0.8 at 0.15mm layer height but don't go under this.