Hard drive tray
A simple HDD tray i designed to go into an old cooler master case which I could no longer find the HDD trays for. If the print is too stiff and cannot flex the tray around the HDD simply snap off the rods and screw it in with the screw holes in the bottom of the tray.
Print level: Beginner
Infill Level: %
Model originally printed on: box frame prusa i3
Recommended print settings:
Print with any layer height, just ensure the top/bottom setting is thick enough so that the honeycomb part remains strong when bending the tray to insert the HDD. Best printed in ABS but can also be printed in PLA. Be sure to have support for the rods.