GoPro Head Strap Mount
Make your own GoPro head strap mount using a 3D printer and a piece of 25mm wide elastic strap.
This project is licensed under the Creative Commons – Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0): http://creativecommons.org/licenses/by-sa/3.0/deed.en_US
Print level: Beginner
Infill Level: %
Model originally printed on: MakerBot Replicator 2X
Recommended print settings:
Print with 3 layers, 20% or higher infill for strength, minimal support is required for this design, print in any solid filament. Although ABS is generally a lot tougher than PLA and so is less likely to break.