Fully assembled 3D printable wrench
After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer.
Now, I´m not talking about a “print-several-pieces-and-then-assemble” version which there are already a ton of on the internet.
What i wanted to do was something i could print and that would actually be fully working straight out of the printer.
I like to think i came pretty close. All you need to do is to remove the internal support and your done!
Keep in mind this is a proof of concept, i just wanted to see if i could do it.
This project is licensed under the Creative Commons – Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0): http://creativecommons.org/licenses/by-sa/3.0/deed.en_US
Print level: Intermediate
Infill Level: %
Model originally printed on: MakerBot Replicator 2X
Recommended print settings:
Print with 2-3 layers, 20% or higher infill for strength. Support is required for this design, print in any solid filament.