Einstein Bust (14K)
Here’s a very nice model of Einstein based on the mesh from http://www.thingiverse.com/thing:999442. I just made it easier to 3d print by fixing a few issues, decimating, reorienting and flattening the base.
Print level: Beginner
Infill Level: %
Model originally printed on: Duplicator 4
Recommended print settings:
It prints in about 9 hours with support. I used 0.1mm layer with 3 perimeters and 20% infill (fast honeycomb). For support, use 5% infill at 4mm and 54 degrees automatic.