Bust – The Huntress v1.2 (FDM and SLA)
This is a simpler bust version of another ‘full size’ figurine that I made which can print ‘out of the box’. I added a special ‘for Resin (SLA) printer’ model (hollow with 2mm thickness, with 2 holes to prevent the specific problem of the suction effect of the resin).
The SLA model was not tested (I didn’t have a SLA printer) but I don’t think there will be a problems with it. If there are any, tell me and I will do the changes if needed.
WARNING: use the proper STL for your printer (the one with SLA in the name is for SLA printers, the other is for FDM printers).
Print level: Beginner
Infill Level: %
Model originally printed on: Solidoodle 4
Recommended print settings:
Truly optimized for FDM printers - No support needed.
It is 110mm tall, 104mm diameter base. Model print tested with these parameters (FDM version):
0.4mm nozzle, ABS 1.75mm, 0.18mm layer (0.15mm will be even better), 2 perimeters, 10% infill, infill where needed.